Synergy 8559 - Dodge Steering Box Brace (09+) User Manual
Parts list, Instructions
SYNERGY MFG. 870 INDUSTRIAL WAY, SAN LUIS OBISPO, CA (805) 242-0397
8559-04 DODGE 2009-2015 STEERING BOX BRACE
GENERAL NOTES:
These instructions are also available on our website at www.synergymfg.com. Check the website for any
updated instructions and additional photos for reference.
This bracket is designed to be bolt on with no modifications.
Thoroughly read all instructions before beginning installation.
PARTS LIST:
1 - 8559-04 Dodge Steering box brace
1 - Pillow bearing
1 - 855702-M30X1.50 Pitman Arm Stud
2 - 7/16-14 UNC 1.50” long bolt
2 - 7/16-14 UNC Nylock nut
4 - 7/16” flat washers
4 - M10-1.50 x 35mm Gr 8.8 bolts
4 - M10 flat washers
4 - M10 lock washers
Parts / Tools Needed to complete installation:
Basic simple hand tools.
1-3/4” open end wrench or large adjustable wrench to accommodate pitman arm bearing stud
Hammer & punch
APPROXIMATE INSTALL TIME: 1-2 HOURS
INSTRUCTIONS:
1) Begin by removing the bolts holding the sway bar clamps to the frame and rotate the sway bar down as
pictured below.
o Use a 15mm socket or wrench for removal.