Smittybilt JB48CFT Frame Cover - Manual

For Technical Support/Warranty Information please call 310-762-9944
Smittybilt, 400 West Artesia Blvd, Compton, CA 90220
Installation Instructions
Frame Cover (Part # JB48CFT)
07-10 Jeep Wrangler
1. REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE PRESENT. READ
INSTRUCTIONS CAREFULLY.
2. Remove upper existing bolts from after market front bumper (Figure 1). Save bolts for later
use.
3. Position Fill Plate over cavity and line up hole on the side tabs of the Fill Plate with holes on
after market bracket.
4. Align and attach Fill Plate to after market bumper with existing hardware remove in Step 2
(Figure 2).
5. Do periodic inspections to the installation to make sure that all hardware is secure and tight.
Remove existing after
market bolt from each side
Existing after
market bolts
Fill Plate installed
Figure 1 Figure 2