Advance Adapters 27-0020T User Manual

Advance Adapters For the car

Advertising
background image

SPECIAL NOTE:

The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the

components will void any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete your conversion,
we strongly recommend that you contact our sales department for more information. This instruction sheet is only to be used for the assembly of Advance Adapter
components. We recommend that a service manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams and other related equipment.
These manuals are normally available at automotive dealerships and parts stores.

KIT CONSISTS OF:

No.

Qty

Part No.

Description

ADVANCE ADAPTERS INC.

P/N: 27-0020T

P.O. Box 247, 4320 Aerotech Center Way
Paso Robles, CA 93447

PAGE 1 OF 1

Telephone: (800) 350-2223

Fax: (805) 238-4201

Page Rev. Date:

11-01-02

TOY. L/C 10 SPL./GM V8 TRANNY KIT

DODGE 29 SPLINE NV4500

1.

1 Kit

50-0222

NV4500/DODGE 29 SPL. / TOY. L.C. 10 SPL.

2.

1

52-0221

NV4500 GM INPUT 1-1/8"

3.

1 Kit

712576

NV4500-1996 GM BHSG ADAPT. KIT

4.

1 Kit

716050D1

NV4500 SHIFTER HANDLE ASSY.

5.

1 Kit

716288

TOY. L/C SLAVE CYL. BRKT. NV4500

6.

1 Kit

716316

T/O BEARING ASSY. L/C 3SP

INSTALLATION NOTES:

This kit is designed to fit the Dodge Standard Duty 29 spline NV4500 transmission.

The front bearing retainer must be removed with the stock input shaft. Install the new GM style input shaft provided. The
bearing retainer must be modified as listed on the 712576 Instruction Sheet.

Remove the stock tailhousing and install the new adapter housing provided in this kit. Refer to the 50-0222 Instruction
Sheet.

This is a parts pull sheet. Refer to the instruction sheet on each kit for proper installation.

Advertising