JLG LSS Scissors User Manual
Page 14
Advertising
SECTION 2 - OPERATION - (LE, MRT, RTS)
2-2
– JLG Lift –
3124288
INTERNAL ERR
9/9
Pin excitation <4.25 V. The sensors may be excessively loading the excitation supply, or the LSS Module may have
hardware difficulty.
High Side Driver Error. The load attached to OUT1 or OUT2 is shorted to battery or ground and has been detected by the
LSS module.
DRDY Interrupt from A/D missing. This may indicate an LSS Module hardware difficulty.
Table 2-1. LSS Fault Codes (LE, MRT and RTS)
Help/Logged
Message
Flash
Code
Description of Situation
Advertising