JLG LSS Scissors - Manual (Page 24)

SECTION 3 - OPERATION - (ES, RT)
3-2 – JLG Lift – 3124288
3.3 DIAGNOSTIC MENU (ES & RT)
The Diagnostic Load Menu is another troubleshooting tool
for the Load Sensing System. Sensor and status informa-
tion is presented in real-time for the technician.
To access the Diagnostic Menu, use the LEFT and RIGHT
Arrow keys to select DIAGNOSTICS from the Top Level
Menu. Press the ENTER key to select the menu.
NOTE: The Diagnostic, Load menu is not available when the
LSS is not enabled. (Machine Setup, Load is set to
0=Not Installed
Press the LEFT and RIGHT Arrow keys to view the load
sub-menus and press the enter key. Once in the load sub-
menu, press the LEFT and RIGHT arrow keys to view the
various displays.
The table below details the structure of the Diagnostic,
Load Menu, and describes the meaning of each piece of
information presented.
3.4 PERSONALITIES (ES & RT)
The following parameter in the PERSONALITIES, LOAD
menu adjust performance of the LSS. All adjustments
must be made in Access Level 1 (33271).
REFER TO JLG WORKSTATION IN THE SKY™ ACCESSORIES IN
THIS SECTION WITH REGARD TO SETTING THE ACCY PERSON-
ALITIES.
Table 3-2. Diagnostic Menu Descriptions (ES & RT)
Diagnostics Menu
(Displayed on Analyzer 1
st
Line)
Parameter (Displayed
on Analyzer 2
nd
Line)
Parameter Value
(Displayed on Analyzer 2 nd
Line)
Description
LOAD:
PLTLOAD +XXXX Kg Displays (Total Measured Force – Empty Platform
Calibration), in kilograms
PLTGROS +XXXX Kg Displays Total Measured Force (Sum of Pins 1 thru 4
LOAD) in kilograms
OVERLOADED? Yes / No Displays Current LSS Module Overload Status
CELL 1 +XXXX Kg Displays Calibrated Cell Reading in kilograms
CELL 2 +XXXX Kg Displays Calibrated Cell Reading in kilograms
CELL 3 +XXXX Kg Displays Calibrated Cell Reading in kilograms
CELL 4 +XXXX Kg Displays Calibrated Cell Reading in kilograms
ANALYZER VX.XXXX Displays Analyzer Software Version
Table 3-3. Personalities (ES & RT)
Submenu (Displayed on
analyzer1st LIne)
Parameter (Displayed on
analyzer 2nd line)
Description
LOAD: ACC’Y XXXX KG
Displays/adjusts a derating
for accessories
OVR DBNCE 3 S
Displays/ adjusts the
debounce delay before an
overload
OVR HOLD 5 S
Displays/adjusts the mini-
mum delay before an overload
can be released.