Echo CS-360T Serial C04412001001 - C04412999999 - Manual (Page 6)

6
D
esCRiption
The ECHO product you purchased has been factory pre-assembled for your convenience. Due to packaging restric-
tions, guide bar and saw chain installation and other assembly may be necessary.
After opening the carton, check for damage. Immediately notify your retailer or ECHO Dealer of damaged or missing
parts. Use the contents list to check for missing parts.
Contents
1 - Power Head
1 - Guide Bar
1 - Kick Guard
1 - Hex Head Bolt
1 - Hex Nut
1 - Saw Chain
1 - Instruction Manual
1 - Safety Manual
1 - Warranty Registration Card
1 - Echo Power BlendX TM 2-stroke oil sample
- Assembly Tool (s)
An Emission Control Label is located on the en-
gine. (This is an EXAMPLE ONLY, information on
label varies by engine FAMILY).
e
Mission
C
ontRol
(
exhaust & evapoRative
)
EPA 2010 and Later and/or C.A.R.B. TIER III
PRODUCT EMISSION DURABILITY (EMISSION COMPLIANCE PERIOD)
The 300 hour emission compliance period is the time span selected by the manufacturer certifying the
engine emissions output meets applicable emissions regulations, provided that approved maintenance
procedures are followed as listed in the Maintenance Section of this manual.
The emission control system for the engine is EM (en-
gine modification) and, if the second to last character
of the Engine Family on the Emission Control Informa-
tion label (sample below) is “C”, “K”, or “T”, the emis-
sion control system is EM and TWC (3-way catalyst).
The fuel tank/fuel line emission control system is EVAP
(evaporative emissions). Evaporative emissions for
California models may only be applicable to fuel tanks.