Echo 77412 Instruction v.2 - Manual

Instruction Sheet
Subject: optIonal dIScharge
tube, KIt # 74634-00
FItS ModelS: 4.5” chIpperS
ch45342 (77412), ch45390 (77413),
ch45540 (77454) and ch450h
Instructions
1.1 attach the optIonal
dIScharge tube
1. Move the chipper deflector weldment inside the chipper
housing upward (Figure 1.1).
pn 74633-00
rev. 111108
Figure 1.2 - Optional Discharge Tube
Figure 1.1 - Chipper Deflector Weldment
Before inspecting or servicing any part of this machine,
shut off power source, remove key, disconnect the bat-
tery cables and make sure all moving parts have come
to a complete stop.
WarnIng
2. Slide the discharge tube onto the chipper housing
ensuring that the weld studs fit into the notches on
the disk cover (Figure 1.2). Tighten using 5/16” flange
nuts.
3. Insert two 3/8” x 5-1/2” bolts into the bolt holes on the
chipper deflector and tighten using 3/8” washers and
3/8” nylock nuts (Figure 1.2).