2N VoiceBlue Lite - Manual v2.6 - Manual (Page 55)

2N - VoiceBlue Lite
• Using the AT order at!m#=read, where instead of # fill in the
number of the announcement which is meant to be loaded into
VoiceBlue. The value “0” is designated for the announcement
DISA, the numbers of the other announcements are given in
Tab. 4.
• After the insertion of an order you will be called upon to select
the name of the audio file under which the announcement from
VoiceBlue is to be filed.
Deleting of announcements
You can gain information about a loaded announcements using the
AT order at!m#=view. To delete an announcement, enter the order
at!m#=erese in the terminal window, where instead of # fill in the
number of the announcement.
6.5. Permitting service mobility extension
As has been stated above, in order for the service mobility
extension to be permitted for the individual subscribers it has to be
first activated using a licence key. The permitting of mobility
extension for subscribers can be performed using the mobility
extension table. Its description is given in chapter 9.5. If in this
table the CLIP of a mobile subscriber and his url is not given, this
function is not permitted for the subscriber.
45