ACE BACKSTAGE Double Wide Stage Pocket - Manual

ACE BACK STAGE CO., IN C.
CLEAR C OM DMX12 PUSH PUSH
Vertical Slant
UL Listed
compliance
Standard
®
LISTED
UL Listed
Connectrix
System
Ready
“Connectrix”
ACE BACKSTAGE CO., INC.
STAGE POCKET SYSTEMS
24846 Avenue Rockefeller | Suite 200 | Valencia, CA 91355
Tel: 661-295-5760 | Fax: 661-295-1122
Email: [email protected] | Web: www.acebackstage.com
DATA SHEET
Stage Pocket
Data Spec Sheet
Revision: 1B.124-224
Model Numbers: #124-xxyy, #224-xxyy (xx= Lid Type and yy= Finish Type)
Model Name: Double Wide Stage Pocket - Extra Large Capacity Standard general use Vertical Slant Panel Pocket
Model Description: Pocket with brushed metal or powder coat finish, choice of lid, with optional panel(s) and connectors
Model Name: DOUBLE WIDE STAGE POCKET
GENERAL DESCRIPTION
Ace Backstage Co. Inc.’s extra large sized Stage Pocket,
the Double Wide Stage Pocket, is a standard general use
vertical slant panel flush stage pocket. The Double Wide
Stage Pocket is made of heavy duty steel and may be used
to conceal audio, communications, data, electric AC power,
switches, video, and voice connections etc. below the floor
surface for easy access and to prevent connector damage.
The Double Wide Stage Pocket has an extra-large capacity
interchangeable panel system which permits easy custom
connector/panel configurations.
FEATURES
• EXTRA LARGE CAPACITY: The Double Wide Stage
Pocket accomodates #PNL-100 Series Panels, #PSW-100
Series Panels, #PNL-120 Series Panels, #PE, and #FP3E
Series Panels in an interchangeable multi-panel system
making for easy custom configurations. Four (4) optional
#PNL-100 Series Panels or two (2) optional #PNL-120
Series Panel will mount up to 24 “CONNECTRIX”, Neutrik®,
and/or Switchcraft® type connectors*. Four (4) optional
#PSW-100 Series Panels will mount up to 24 Switchcraft®
type connectors.
• DURABLE CONSTRUCTION: Welded steel construction
of Double Wide Stage Pocket Lid, Mounting Flange, and
Pocket Body resist bending under even the most severe
stage loads. The Lid and Mounting Flange is made from
1/8” (nominally 11 ga. (.120”)) thick CRS steel while the
Pocket Body is made from 16 ga. (.062”) thick CRS steel.
• SPRING LOADED HINGE PINS: Removable spring
loaded hinge pins permit easy exchange of lids for Carpet
Lid (CL), Locking Lid (LL), Standard Lid (SL) and other
custom application lids.
• CABLE WAY SLOTS: Generous 3/8” x 16” Cable Way
Slots permit easy cable exit from pocket(s), even for large
gauge cables. Two Cable Way Slot Closures channel closes
the slot when not in use.
• EASY INSTALLATION: Easy installation into 8.5” x 16.5”
rectangular cutout in stage floor. Open easy access from
the top or back of the stage pocket allows simple connec-
tor/panel terminations.
• DECORATOR FINISHES: Scratch/wear resistant fin-
ish, oven cured powder coat electro-static applied inside
and outside entire Double Wide Stage Pocket. Decorator
neutral Antique Copper Vein and Textured Black finishes
are standard. A Solid Brass Lid and Mounting Flange with
a brushed finish is also available by special order.
• RUBBER LID STOPS: Rubber lid stops set into recessed
mount cradle the lid to prevent lid rattle.
• UL LISTED: Double Wide Stage Pockets compliance
Standard 514A file FLOOR BOX 44LK Suitable for raised
floor applications.
MATERIALS
ACE Double Wide Stage Pocket Lids and Mounting Flanges
are made of 1/8” (nominally 11 ga. (.120”)) thick CRS steel
while the Double Wide Stage Pocket Body is made from
16 ga. (.062”) thick CRS steel. The exception to this is the
Brass Double Wide Stage Pocket Lid and Mounting Flange
which is made of 1/8” (nominally 11 ga. (.120”)) thick Half
Hard Solid Brass with a Stage Pocket Body made from 16
ga. (.062”) thick CRS steel.
FINISHES
ACE Double Wide Stage Pockets come with a scratch/wear
resistant finish, oven cured powder coat electro-static applied
inside and outside the entire Double Wide Stage Pocket.
Decorator neutral Antique Copper Vein and Textured Black
finishes are standard. A Solid Brass Lid and Mounting Flange
with a brushed finish is also available by special order.
INCLUDES
ACE Double Wide Stage Pockets Include:
• (1) Stage Pocket Body with Mounting Flange
• (1) Lid
• (2) Hinge Pins
• (2) Springs
1 of 4
Ace Backstage Co., Inc. Stage Pocket Systems | 24846 Avenue Rockefeller | Suite 200 | Valencia, CA 91355 | Tel: 661-295-5760 | Fax: 661-295-1122 | Web: www.acebackstage.com