ACE BACKSTAGE Super Double Wide Stage Pocket User Manual

Data sheet, Ace backstage co., inc, Stage pocket systems

Advertising
background image

ACE BACK

STAGE CO., IN

C.

CLEAR C

OM

DMX12

PUSH

PUSH

Horizontal Slant

UL Listed

compliance

Standard

®

LISTED

UL Listed

Connectrix

System

Ready

“Connectrix”

ACE BACKSTAGE CO., INC.

STAGE POCKET SYSTEMS

24846 Avenue Rockefeller | Suite 200 | Valencia, CA 91355

Tel: 661-295-5760 | Fax: 661-295-1122

Email: [email protected] | Web: www.acebackstage.com

DATA SHEET

Stage Pocket

Data Spec Sheet

Revision: 1A.134-234

Model Numbers:

#134-xxyy, #234-xxyy (xx= Lid Type and yy= Finish Type)

Model Name:

Super Double Wide Stage Pocket - Super Double Capacity Horizontal Panel Pocket

Model Description: Pocket with brushed metal or powder coat finish, choice of lid, with optional panel(s) and connectors

Model Name: SUPER DOUBLE WIDE STAGE POCKET

GENERAL DESCRIPTION

Ace Backstage Co. Inc.’s Super Double capacity Horizontal

Panel Pockets offer a rugged welded steel construction and

durable finishes with a detachable trim bezel-lid, horizontal

panel mounting brackets with included back boxes. Super

Double Wide Pockets provide more than twice the capacity

of our Double Wide vertical pockets in the same space.

The Super Double Wide Pocket is the same size as the ACE

Double Wide Pocket with Back Box except it provides almost

2 times the connectivity capacity using a HORIZONTAL

PANEL design. The basic construction incorporates 3 sub-

assemblies. A unique Trim Bezel-Lid assembly with spring

loaded blind hinge pins and hinged cableway slot closure

that mounts directly to the ACE #104BBX Back Box. As-

sembled in the Back Box is a set of panel mounting and AC

barrier isolation raceway brackets (#BRK104).

The Trim Bezel assembly is a heavy duty welded 11 gauge

(.120 thick) steel or solid brass assembly (Lid is 10 gauge

(.135 thick) steel. Each Bezel is available with either a flat

flush standard lid (SL) or a recessed carpet lid (CL). Steel

Bezels with flush flat lids come in 2 oven cured powder

coat decorator finishes: antique copper vein and textured

black. Solid Brass Trim Bezel Lid assembly has a brushed

finish and is available on a special order basis. The in-floor

appearance is the same as the Double Wide Pocket.

The HORIZONTAL PANEL in the Super Double Wide Pocket

is designed for high capacity connectivity. In less than two

square feet (10.5”x18.5”) the Super Double Wide Pocket

provides abundant panel space for up to 48 “Connectrix”

connectors*. This large connectivity capacity is possible

using a Horizontal Panel Design and a set of panel mounting

brackets. Generous combination conduit knockouts on four

sides provides in-out-and-thru ways for both low voltage

and AC electric cabling.

The Super Double Wide Pocket panel system is unique and

flexible. Use any combination of standard ACE CNC ma-

chined panels designed for ACE Stage Pockets or choose a

custom layout made to order aluminum “Connectrix” panel.

Generous clearances above and below the panel(s) permit

easy termination and access to an array of audio, video,

data, communication and control connections.

FEATURES

EXTRA DOUBLE LARGE CAPACITY: The Super Double

Wide Stage Pocket accomodates #PNL-100 Series Panels,

#PSW-100 Series Panels, #PNL-120 Series Panels, and

#PNL-140 Series Panels in an interchangeable multi-panel

system making for easy custom configurations. Two (2)

optional #PNL-140 Series Panels, eight (8) optional

#PNL-100 Series Panels or four (4) optional #PNL-120

Series Panels will mount up to 48 “Connectrix”, Neutirk®,

and/or Switchcraft® type connectors*. Eight (8) optional

#PSW-100 Series Panels will mount up to 24 Switchcraft®

type connectors.

DURABLE CONSTRUCTION: Welded steel construction

of Super Double Wide Stage Pocket Lid, Mounting Flange,

and Pocket Body resist bending under even the most severe

stage loads. The Trim Bezel Mounting Flange is made from

1/8” (nominally 11 ga. (.120”)) thick CRS steel, the Lid is

made from 10 ga. (nominally .135”) thick CRS steel, and

the Pocket Body Back Box is made from 14 ga. (.071”)

thick CRS steel.

SPRING LOADED HINGE PINS: Removable spring

loaded hinge pins permit easy exchange of lids for Carpet

Lid (CL), Locking Lid (LL), Standard Lid (SL) and other

custom application lids.

CABLE WAY SLOTS: Generous 3/8” x 16” Cable Way

Slots permit easy cable exit from pocket(s), even for large

gauge cables. Cable Way Slot Closures close channels when

slot is not in use.

EASY INSTALLATION: Easy installation into 10” x 18”

rectangular cutout in stage floor. Open easy access from

the top of the stage pocket allows simple connector/panel

terminations.

DECORATOR FINISHES: Scratch/wear resistant finish,

1 of 6

Ace Backstage Co., Inc. Stage Pocket Systems | 24846 Avenue Rockefeller | Suite 200 | Valencia, CA 91355 | Tel: 661-295-5760 | Fax: 661-295-1122 | Web: www.acebackstage.com

Advertising