AirLive AirMax5N-ESD - Manual (Page 12)

1. Introduction
AirLive AirMax5N/ESD User’s Manual
6
1.6.3 WDS Bridge Mode
This mode is also known as “WDS Pure MAC mode”. When configured to operate in the
Wireless Distribution System (WDS) Mode, the AIRMAX5N provides bridging functions with
remote LAN networks in the WDS system. The system will support up to total of 8 bridges in
a WDS network (by daisy chain). However, each bridge can only associate with maximum
of 4 other bridges in the WDS configuration. This mode is best used when you want to
connect LAN networks together wirelessly (for example, between office and warehouse). If
you have more than 2 AP in WDS Bridges mode, please remember to avoid duple
connection to one device, otherwise the network loop can be occurred. This mode usually
delivers faster performance than infrastructure mode.
1.6.4 WDS Repeater Mode (WDS + AP)
In WDS Repeater mode, the AIRMAX5N functions as a repeater that extends the range of
remote wireless LAN. In this mode, the remote Access Point must have WDS (Wireless
Distribution System) capability. If you require the PC’s MAC addresses to be preserved
when the data pass through the Repeater, it is necessary to use the WDS Repeater mode.
Because the radio is divided into WDS + AP mode, the Repeater mode will have less
performance and distance.