AirLive AirMax5N-ESD - Manual (Page 30)

4. Web Management-Wireless and WAN Settings
AirLive AirMax5N/ESD User’s Manual
24
Operation Mode: This menu is where you will find wireless and WAN settings. The
AirMax5N’s wireless settings are dependent on the wireless operation mode you
choose; only the applicable wireless settings for selected operation mode are
shown. For example; WAN port setting is available only for AP Router and WISP
Router mode, it will only be shown in those modes. To access wireless settings,
click on the “Setup” button within each operation mode. For explanation on different
wireless modes, please refer to Chapter 1. We will talk about functions in this menu
for this chapter.
System Configuration: All settings besides Wireless and WAN functions are in
this category. The system configuration including changing password, upload
firmware, backup configuration, settings PING watchdog, and setting management
interface. We will talk about this menu’s function in Chapter 5.
Device Status: This section for monitoring the status of AirMax5N. It provides
information on device status, Ethernet status, wireless status, wireless client table,
and system log.
Logout: Please make sure to Logout after you finish all settings.
4.2 Operation Modes (Wireless and WAN Settings)
The wireless settings of AirMax5N are dependent on the wireless operation mode you
choose. Therefore, the first step is to choose the operation mode. For explanation on when
to use what operation mode, please refer to Chapter 1.
When you select “Wireless Settings” in the welcome screen, or click on the “Operation
Mode” on the top menu; the following screen will appear:
This tells you what
is the Current
Operation Mode
Configure Wireless and WAN Settings
After you select the new
operation mode, click
here to Change.
Select one of the
wireless operation
modes here