Allworx 9204G Phones - Manual (Page 18)

Allworx Phone Model 9204/9204G User Guide
Page 10 +1 866 ALLWORX * +1 585 421 3850
www.allworx.com
Revised: 5/21/14
One party may hang up to exit the conference; the remaining two parties continue to be
connected.
To have a private conversation with one of the parties, split the conference:
a. Use the phone UP / DOWN scroll soft keys, and select the Call Appearance PFK of
the person.
b. Press the HOLD button. The display indicates the two parties involved in the
conference The Call Appearance PFK for the person on hold flashes. Talk privately
to the remaining party.
c. To have the person re-join the conference, press CONF, then select the flashing Call
Appearance PFK. The three-way conference becomes re-established.
3.2.4 Transfer
The TRANSFER button enables sending the active call to another number. After starting the
transfer, the Transfer button is solid red, which indicates transferring a call to another extension
using a Blind or an Attended Transfer. The transfer option works differently, depending on the
Allworx server software version. Users have two transfer options:
• Unannounced (Blind) Transfer: user does not talk to the transfer recipient prior to
transferring a call to that extension.
• Announced (Attended) Transfer: user talks to the transfer recipient prior to
transferring a call to that extension.
Allworx Server Software 7.3 or Lower
To do an Unannounced (Blind) transfer :
1. Press the TRANSFER button. This places the current call on hold.
• Key System Mode: To transfer a call to an external party, press a free Line
Appearance PFK, and then dial the phone number.
• PBX Mode: Continue to step 2.
2. Wait for the dial tone, and then dial the number to transfer the call.
3. Hang up, press the TRANSFER button, or press the XFER soft key.
Note:
The Allworx Server Administrator may configure this method for server 7.4 and greater based on
the phone configuration.