Allworx 9204G Phones - Manual (Page 24)

Allworx Phone Model 9204/9204G User Guide
Page 16 +1 866 ALLWORX * +1 585 421 3850
www.allworx.com
Revised: 5/21/14
4.3 End a Call
• Place the receiver on the hook. If using the speaker phone or headset, press the
SPEAKER button.
• Press another PFK. If a second incoming call is on another PFK, pressing that PFK
ends the current call and answers the incoming call (unless the phone configuration
enables auto on hold).
• Press the RELEASE button to end a call and start a new call.
4.4 Headset
Press the SPEAKER button to activate the headset, and then press the SPEAKER button again
to disconnect the call.
4.5 Directory Dialing
1. Press the UP / DOWN scroll soft keys to view a list of all User Extensions, System
Extensions, and Speed Dial numbers by Name or Description. While the handset is off
the hook, the rightmost soft key changes to the directory listing option: PHONEBK. Press
to initiate.
2. Use the UP / DOWN scroll soft keys to highlight the name (or description) and extension
or press the keypad to jump to a specific alphabetic section of the directory. Press
SELECT
to dial the number.
4.6 Redial a Number
1. Press the REDIAL soft key on the phone display screen.
2. Press the CALLS softkey. Use the UP / DOWN scroll softkeys to highlight the call in the
display. Press SELECT
.
Note:
The Allworx Server Administrator can create a PFK to activate the headset instead of using the
SPEAKER button.