Aquascape Signature Series Check Valve (29501) - Manual

Signature Series
Check Valve
Installation Instructions
Made in China for
Aquascape, Inc.
St. Charles, IL 60174 • Brampton,ON, L6T 5V7
www.aquascapedesigns.com
Item #XXXXX.082006
CheCk valve assembly detaIls
Signature Series Skimmer Installation
©2006 aquascape, Inc. • all Worldwide Rights Reserved IDD 06084694-ADI 060XXXX
The Signature Series check valve comes with two adaptors that
replace the standard pvc pipe sockets on each end of the check
valve. One adaptor threads directly into the pump, the other
threads directly into the bulkhead on the back of the skimmer
that supplies water to the Biofalls. Apply silicone or Teflon
tape (not included) to the threads of the fitting attached to the
bulkhead fitting.
PaCkage InCludes:
• Check Valve Assembly
• Instructions
for Use
Also Consider...
ecosystems® aquaclearer™ extreme
bacteria
The EcoSystems ® Aquaclearer™ Extreme
line of dry and liquid bacteria are a
perfect match with your AquaMats ® . The
100% natural bacteria enzyme complex
will thrive on the varied surface textures
of the AquaMats ® , effectively reducing harmful ammonia,
nitrite, and nitrate. Improves the overall water quality and
clarity in the pond. Item #’s 29298-29303
ecosystems® aquaclearer™ extreme
Cold Water liquid
EcoSystems ® Aquaclearer™ Extreme Cold
Water Liquid is specially blended with very
high bacteria and enzyme counts that are
more effective and efficient in cold water temperatures. Use
EcoSystems ® Aquaclearer™ Extreme Cold Water Liquid for
seeding the Aquamats ® or the biological filter in early spring to
help start the pond off right.
Item #’s 29305-29307
1 2
3 4
Pondless Installation
• For the Pondless application you replace
the standard pvc pipe socket on the
pump end of the check valve.
• The PVC flex pipe from the Biofalls can
be trimmed to proper length and inserted
through the slot on the side of the
Pondless vault. Prime and glue the end of
the PVC flex pipe and fitting on the end of
the check valve assembly. Hold the pipe
into the fitting for at least 60 seconds.
The cord from the pump can be buried
just beneath the stone and gravel and
run over to the electrical supply.
Check valve parts
assembly order
Signature Series Skimmer
& Check Valve parts
assembly order
1
2
00000 SS Check Valve Instruction1 1 8/30/06 10:16:04 AM