BLACKHAWK! POWERPAK MODULAR CHEEK PIECE - Manual

www.BLACKHAWK.com
©BLACKHAWK! Products Group ™ NORFOLK, VA U.S.A. 1.800.694.5263
50107101 REV. 04.08
blackhawk.com
©BlackHawk Products Group ™ NORFOLK, VA U.S.A. 1.800.694.5263
www.BLACKHAWK.com
©BLACKHAWK! Products Group ™ NORFOLK, VA U.S.A. 1.800.694.5263
Installation Instructions
Page 3
Product Maintenance
Installation Instructions
The exterior of the PowerPak may be wiped clean with a cloth and cleaning products safe
for plastics.
IMPORTANT INFORMATION ABOUT YOUR BLACKHAWK! POWERPAK SYSTEM:
The PowerPak System should only be used with the specific stock for which it was designed.
Before removing or installing the PowerPak, be sure that your firearm is unloaded and fol-
low the assembly instructions provided with this product. Check all functions of your firearm
after the PowerPak is installed. If you do not feel competent to check the proper function
yourself have your gunsmith check this for you. Finally, it is important to test-fire the firearm
after re-installing the PowerPak System, but before using it in the field to be certain it func-
tions properly and you can handle the firearm safely.
All firearms are potentially dangerous; their improper use may cause great harm, personal
injury or death. It is your responsibility to know the safe use, procedures and operation of
your firearm, and to store, handle, and transport your firearm safely. Proper training is avail-
able through accredited firearms safety training programs.
CUSTOMER SATISFACTION
Customer satisfaction is our number one priority. Do not hesitate to contact us with any ques-
tions or concerns. We will do our absolute best to assist you with your every need.
Due to manufacturing variations, we do not warrant that your PowerPak will function cor-
rectly with any specific stock. Except for your right to return the PowerPak for replacement
or refund within 30 days, this product is sold “AS IS” and “WITH ALL FAULTS”. To the extent
allowed by law, we specifically disclaim any expressed or implied warranties, including, but
not limited to, warranties of merchantability and fitness for a particular purpose.
Please DO NOT ship any items for service without first obtaining a RMA#.
Product returns should be sent to:
BLACKHAWK! Products Group™
2100 South Silverstone Way
Meridian, ID 83642
USA
Customer Service Phone Number:
800.694.5263 (Between the hours of 8:00 a.m. & 5:00 p.m. EST)
PowerPak ™
Owner’s Manual
Unique Features Include:
• High cheek piece for use with optical sights
• Low cheek piece for ghost ring or factory sights
• Spare ammo ready when you need it
• Water tight storage compartment for earplugs, batteries, etc.
ATTENTION: Read and follow all instructions and warnings prior to installation
and/or firing a PowerPak System equipped SpecOps Stock. If you are at all unsure
of your ability to install the PowerPak System safely, please seek the services of a
competent gunsmith.
WARNING: Before you begin installation, make sure that the shotgun is
UNLOADED. Carefully check the chamber and magazine tube making both visual
and touch verification.
Important Notice: Once installed the PowerPak is difficult to remove, so plan con-
figuration carefully prior to installation. Consider the following: What type of sight is
being used (standard, ghost ring, rifle or optical)? Is the shooter left or right hand-
ed? Does the shooter desire to carry extra ammunition and/or spare batteries?
Parts List:
• 1 - High Cheek Piece (For use with optical or raised ghost ring sights)
• 1 - Low Cheek Piece (For use with standard bead, rifle or ghost ring sights)
• 1 - Shell Holder
• 1 - Battery/Storage Compartment (Packaged in right handed configuration)
• 1 - Ball End Wrench
• 12 - Mounting Screws (4 Long, 4 Medium, 4 Short)