BLITZ FATT Advance Plus - Manual

Instruction Manual
Thank you for purchasing our product.
Before installing of this product, please read the service and the wiring manual of the vehicle
as well as this instruction manual.
Also please keep this manual as long as this product is used or hand it to new owner when you
sell the vehicle or this product.
Ignore these indications may cause serious injuries or even death to the
indivisual and/or to a third party.
Ignore these indications may cause serious injuries or injuries to the
indivisual and/or to the third party.
Ignore these indications may cause injuries or minor injuries to the
indivisual and/or to the third party. I may also cause malfunctions and
breakages to the product and/or to the vehicle.
Ignoring these indications may not lead 100% potential of this product
and/or cause of system failure.
Explanation of the mark in the content
Request
Please wear the gloves and goggle
to protect your eyes and hands.
！ Danger
！ Caution
！ Attention
Please read carefully and understand the contents befor installing e
Request
！ Danger
！ Warning
！ Caution
Request
Warning ！
Caution ！
Request
To install
Note on “How to use this product” and “installation procedure” are explained in detail in this manual.
Please keep this manual in the vehicle to be able to check anytime.
This product consists of all parts which are listed on this manual. In case any parts are missing, please contact the shop you purchased.
BLITZ Co.,Ltd will not be responsible for any breakage and malfunctions caused in installing this product with a vehicle installed with a third party’s
product(s) and with a reconstructed vehicle.
BLITZ Co.,Ltd will not be responsible of any breakage, malfunctions and liabilities caused by wrong installation and usage.
This product and its accessories may be changed without announcement for improvements.
This product purposes is only for the engine after idling. Please do not use it for other purpose.
■
■
■
■
■
■
■
Please install this product at the shop with a mechanic who has a technical knowledge about this product.
Please turn off the engine while installed. If not, you may suffer from carbon monoxide poisoning.
Please lock the tires before installing this product.
When you modify the safety harness of Engine, brake, Air bag or any related to the driving, Please be careful not to connect wrong harness.
Also please check if the power harness has a 30A fuse or less.
Using more than ３０Ａ may cause a fire.
Do not mis-wire the harness. It may cause a malfunction and/or fire.
Please disconnect the ground from the battery while installing this product to avoid a fire by an electric short, breakage of
electronic part(s) and/or burn(s)
Please connect the harness to the safety circuit. If ignoring the connection to the parking brake or connecting to the ground directly may
cause of a breakage or serious accident.
■
■
■
■
■
■
■
Please do not touch the Exhaust manifold, Radiator, or Engine unit when it is hot as it would cause of severe burn.
Please pay attention to infant, kids or animal. It would cause of accident by swallowing the small parts.
When you take a ruggage in or out from the trunk, please be careful that your clothes may burn or melt by touching the tail pipe.
Please do not attach the controller unit at the location where it prevents the driving or the safety device such as an air bag.
Please do not damage any wiring(s) and/or piping(s) from the engine room while installing this product.
It would cause a fire by an electric short, breakage to the engine, vehicle and/or to the electronic part(s).
Please do not leave the vehicle while after idling.
■
■
■
■
■
■
Please do not drop this device before installation or installing by force. It would cause a malfunction or a breakage of the device.
This device is made for 12V ground vehicle. Please do not install at other vehicle.
Please use insulating tape for unused connector to avoid shortage.
Please do not use the harness which is not listed on the attachement set or carefully use after checking if it is strong enough.
The harness must be avoid to install spark signal, radio, HID, Navigation/TV system, and heated location such as near turbo device
causing malfunction by noise or heat.
Try not to bend harness near sensor and connector when installing.
To disconnect, completely detatch from the connector and not to pull harness itself.
■
■
■
■
■
■
■
■ Wipe off with soft clothes to clean the device. Do not rub strongly with the cleaner causing the device malfunction.
Do not throw away the original detached components from the vehicle. Please keep the components securely.
We are not liable from any damages caused to the components while installing. Please be extra careful through the installation.
When disconnect the battery, it might cause memory loss. Follow the each vehicle instruction throughly to re-memory after installing.
We are not liable from any memory loss.
Please perform regular maintenance and be extra cautious. This product's durability and components are thoroughly tested, however, depending on
the vehicle's driven condition and/or climate, the durability may decrease.
､
■
■
■
■Do not install this product at a location where it could get wet and/or highly heated. It might cause malfunction, electrocution, fire, breakage and/or burns to the products.
Ask for a professional or a technician to perform the installation of this products.
Do not gaze the devices when you driving.
Park the vehicle at safe location to set the device.
Do not misuse, abuse, alter, decomposit the device. It causes device malfunction or accident and the warranty will be voided.
When malfunction occurred, (got wet/stench/smoke/strange meter movement), stop using this device immediately and contact to
the seller or installer. If you continue to use, it causes accident or vehicle fire, or severe damage.
■
■
■
■
■
We are not liable from any damages by using this devices or caused by the components.
Do not put excessive force, especially the connector. To disconnect, completely detach from the connector and not to pull the harness.
■
■
■Displayed data is for reference. Follow the vehicle's genuine meter when driving.
−１−