BLITZ SBC i-D Optional Harness User Manual

Online manual not for resale purposes

Advertising

Online Manual Not For Resale Purposes

The Optional Harness is not included with SBC iD

The optional harness converts voltage signal from the factory ECU and converts it to a numerical
value to be displayed on the SBC I-D. Prior to installation, please read and understand this
manual completely.

IMPORTANT

- Please have this harness installed by a qualified technician.
- The factory service manual is REQUIRED for proper installation of this unit.
- Please pay attention and tap the correct wire. If the wrong wire is taped, the SBC I-D may read
the wrong information or vehicle damage or fire may occur.
- “Blitz” is not responsible for any damages caused to the vehicle by installation of this product.
- Please remove the battery prior to installation. If the battery is connected a short circuit may
occur.
-This part is subject to change without notice.
- Please keep this manual after the installation is complete.

PARTS LIST

Azusa, CA 91702

Optional Harness Installation Manual

HARNESS

Authorized Distributor (North America)

Tel: (626) 839-8350
Fax: (626) 812-7221

www.blitzpowerusa.com

1 Pc.

Blitz Global Network

985 North Todd Avenue

Options Auto Salon

Warning-All images and text in this manual is the property of BLITZ Co.,Ltd. (Japan). No part of this may be

reproduced, stored in retrieval systems, or transmitted in any form or means without prior written premission of

BLITZ Co.,Ltd. (Japan)

Advertising

Table of contents

Document Outline

Sheet1

Popular Brands

Popular manuals