chiliGREEN HMC-3903 - Manual (Page 55)

55 / 62
11. Firmware Installation and Upgrade
The firmware is the operating system (OS) installed on the device.
11.1 Firmware Installation
If it is the first time that you are installing a SATA HDD (no matter it is a new one or an old one)
into the player, please make sure you have read the following steps in advance.
Step 1: Backup Data
Please backup the data in the HDD before installing it into the player. The following steps will
format the hard disc, which will erase all data currently stored on the hard disc.
Step 2: Install the HDD
Follow the HDD Installation Guide, and install the HDD into the player.
Step 3: Prepare the USB Pen Drive
You will need a USB Pen Drive for firmware installation. Copy the 6 files from the USB Pen
Drive installation folder on the Driver CD to the root directory of your USB Pen Drive.
Step 4: Connect the USB Pen Drive
Plug the USB Pen Drive into one of the USB HOST ports of the player.
Step 5: Hold the POWER button
Press and hold the POWER button on the front panel, and do not loosen.
Step 6: Connect the power cable
Plug the power cable into the DC IN jack, wait for about 3 seconds or more, and then loosen
your finger on the POWER button;
Firmware installation will start in about 30 seconds. The LED indicators on the front panel will
be enlightened and flashing during installation. If it is connected to a TV set, a yellow install
page will appear on the TV screen.