Contigo AUTOSEAL 32 oz. Cortland Water Bottle - Manual

10 min.
© 2014 Ignite USA. All Rights Reserved.
Should you have any questions about your purchase, please
contact us at 1-888-262-0622
• Product is NOT designed for hot liguids. Use only with cold liquids.
• Not for use with carbonated or pulpy beverages.
• Always press the AUTOSEAL ® button with the bottle in an UPRIGHT position prior to tipping
it to drink. This will release any built-up pressure. Release button to seal.
• Prior to drinking, make sure the lid is properly threaded to the body and screwed on completely.
• Avoid accidental depressing of the AUTOSEAL ® button by keeping the button free and clear
of other objects.
• DO NOT overfill. Fill liquids to just below the threading in the body.
• DO NOT microwave or freeze.
• DO NOT use cleaners containing bleach, chlorine, abrasives, and/or other harsh chemicals.
• DO NOT continue to use product if damaged.
• DO NOT carry bottles containing liquid in bags to help prevent accidental opening.
USAGE RECOMMENDATIONS
• The AUTOSEAL lid is designed to help prevent spills from accidental tipping.
• The AUTOSEAL lid that came with your new purchase is designed to only fit your Contigo ®
water bottle. Not for use with other products.
CLEANING INSTRUCTIONS
• Wash thoroughly before first use.
• RINSE LID IMMEDIATELY AFTER EACH USE with
warm water, pressing the AUTOSEAL ® button so
water flows through the Drink Spout and Vent Hole.
• Lid, plastic body and straw are top-rack
dishwasher safe.
• Hand-wash stainless steel body.
• If washing by hand, soak the lid for 10 minutes in hot, soapy tap water. Hand-wash body with
warm water and a mild detergent. Rinse both the lid and body thoroughly before use.
• For best results, use a Contigo ® bottle brush, www.GoContigo.com.
• ALWAYS STORE BOTTLE WITH LID REMOVED to allow parts to dry completely.
PRESS BUTTON
to open
TIP
to drink
RELEASE BUTTON
to Automatically Seal
AUTOSEAL® Water Bottle
Care and Use Instructions
CAUTION