Control Company SOLAR DESKTOP CALCULATOR - Manual

KEY FUNCTIONS
ON/AC Turns the calculator on
Clears all calculator contents (grand
total, memory, etc.)
CE/C Cancels the last entry
Each press shifts back 1 digit
GT First press displays the grand total memory
Second press clears the grand total memory
MU Performs mark-up calculations
M+ Adds the displayed value to the memory
M– Subtracts the displayed value from the memory
MRC First press recalls the memory total
Second press clears the memory total
GRAND TOTAL MEMORY (GT)
Every calculation result is automatically added to
the grand total memory.
Example 1: Press Result
ON/AC 0
2 ÷ 4 = 0.5
2 X 3 = 6.0000
GT 6.5
Example 2: Press Result
ON/AC 0
2 X 3 = 6.0000
100 - 15 % 85
GT 91
To recall the grand total memory, press the GT key
once. To clear the grand total memory, press the
GT key while displaying the grand total.
MARK-UP CALCULATION (MU)
The basic use of the Mark-Up (MU) key is identical
to using the % key to add a desired margin
percentage to the input number.
A complex use of the Mark-Up key is to calculate a
desired margin percentage based on the result of
the calculation (as opposed to the input number).
The following examples will both use a desired
margin percentage of 15% to illustrate the
difference between the two uses of the Mark-Up
calculation.
Example 1 (Mark-Up % based on input number):
Press
Result
ON/AC 0
100 X 15 MU 115
{100+15%=115; however, 115-15%=97.75}
Example 2 (Mark-Up % based on result):
Press
Result
ON/AC 0
100 ÷ 15 MU 117.647058823
{100+15%=115; however, 117.647058823-15%=100}
SOLAR
DESKTOP
CALCULATOR
INSTRUCTIONS
Control Company Cat. No. 6032
© 2009 Control Company. 92-6032-00 Rev. 2 090309
BATTERY REPLACEMENT
The primary power for the calculator comes from
the solar cell; however, the backup battery will
provide power for low light conditions. Erratic
readings, a faint display, or no display are all
indications that the backup battery must be
replaced. Remove the battery cover, located
on the back of the unit. Remove the exhausted
battery and replace it with a new AA alkaline
battery. Make certain to insert the new battery
with the proper polarity as indicated by the
illustration in the battery compartment. Replace
the battery cover. WARRANTY OR SERVICE
For warranty or service contact:
CONTROL COMPANY
4455 Rex Road
Friendswood, Texas 77546 USA
Ph. 281 482-1714 • Fax 281 482-9448
E-mail [email protected] • www.control3.com
Control Company is ISO 9001 Quality-Certifi ed by
DNV and ISO 17025 accredited as a Calibration
Laboratory by A2LA.