Det-Tronics 000499-142 DVR, 16 Camera, 500GB (GE Security) - Manual (Page 8)

Chapter 2: Installation
4 TruVision DVR 30 User Manual
Installation environment
When installing your product, consider these factors:
• Ventilation
• Temperature
• Moisture
• Chassis
load
Ventilation: Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions. Ensure that the location planned for the installation of
the unit is well ventilated.
Temperature: Consider the TVR 30’s operating temperature (32 to 104°F, 0 to 40°C)
and humidity specifications (10 to 90% relative, noncondensing) before choosing an
installation location. Extremes of heat or cold beyond the specified operating
temperature limits may reduce the life expectancy of the TVR 30. Do not install the
TVR 30 on top of other hot equipment. Leave 1.75 inches (44 mm) of space between
rack mounted TVR 30 units.
Moisture: Do not use the unit near water. Moisture can damage the internal
components. To reduce the risk of fire or electric shock, do not expose this unit to rain
or moisture.
Chassis: Equipment weighing less than 35 lbs (15.9 kg) may be placed on top of the
TVR 30 only if the TVR 30 is placed on a shelf and not rack mounted.
Be sure to power off the unit before making any connections. In order to prevent the
unit from losing data and system damage that may be caused by sudden power, use
of an uninterruptible power supply is highly recommended.
Note: Do not remove the rubber feet, and always leave a space for air ventilation on
the unit’s bottom side.
Unpacking the TVR 30 and its accessories
When you receive the product, check the package and contents for damage, and
verify that all items are included. There is an item list included in the package. If any
of the items are damaged or missing, please contact your local supplier.
Items shipped with the product include:
• TruVision DVR 30
• IR (infrared) remote control
• Two AAA batteries for the remote control