ElmoMC SimplIQ Digital Servo Drives-Whistle Installation Guide - Manual (Page 59)

Whistle and Tweeter Installation Guide Technical Specifications
MAN-WHTWIG (Ver. 1.604)
www.elmomc.com
59
4.3.2. Tweeter
Feature Units 3/60 2.5/100
Minimum supply voltage VDC 7.5 12
Nominal supply voltage VDC 50 85
Maximum supply voltage VDC 59 95
Maximum continuous
power output
W 160 200
Efficiency at rated power (at
nominal conditions)
% > 99
Maximum output voltage > 95% of DC bus voltage at f=22 kHz
Auxiliary power supply VDC 12 to 95 VDC (up to 2.5 VA inc. 5 V/200 mA for encoder)
Amplitude sinusoidal/
DC continuous current
A 3.3 2.5
Sinusoidal continuous RMS
current limit (Ic)
A 2.3 1.8
Peak current limit A 2 x Ic
Weight g (oz) 27 g (0.95 oz)
Dimensions mm (in) 51 x 12.5 x 42 (2" x 0.49" x 1.65")
Digital in/Digital out/Analog in 6/2/1
Mounting method PCB mount or soldered pins
4.3.3. Auxiliary Supply
Feature Details
Auxiliary power supply Isolated DC source only
Auxiliary supply input voltage 12 VDC to 95 VDC
Auxiliary supply input power < 2.5 VA (this includes the 5 V/200 mA load for
the main encoder only)