ElmoMC ExtrIQ Digital Servo Drives-Falcon User Manual
Falcon digital servo drive installation guide
Advertising
Table of contents
Document Outline
- Chapter 1: Safety Information
- Chapter 2: Introduction
- Chapter 3: Installation
- 3.1. Before You Begin
- 3.2. Unpacking the Drive Components
- 3.3. Mounting the Falcon
- 3.4. Connecting the Cables
- 3.4.1. Wiring the Falcon
- 3.4.2. Connecting the Power Cables
- 3.4.3. Connecting the Optional Backup Supply Cable (24 V)
- 3.4.4. Feedback and Control Cable Assemblies
- 3.4.5. Main Feedback Cable (FEEDBACK A)
- 3.4.6. Main and Auxiliary Feedback Combinations
- 3.4.7. Auxiliary Feedback (FEEDBACK B)
- 3.4.7.1. Main Encoder Buffered Outputs or Emulated Encoder Outputs Option on FEEDBACK B (YA[4]=4)
- 3.4.7.2. Differential Auxiliary Encoder Input Option on FEEDBACK B (YA[4]=2)
- 3.4.7.3. Single-Ended Auxiliary Input Option on FEEDBACK B (YA[4]=2)
- 3.4.7.4. Pulse-and-Direction Input Option on FEEDBACK B (YA[4]=0)
- 3.4.8. I/O Cables
- 3.4.9. Communication Cables
- 3.5. Powering Up
- 3.6. Initializing the System
- Chapter 4: Technical Specifications