Englert S5 S5PV User Manual
S-5-pv kit
The right way
to attach almost anything to metal roofs!
S-5-PV Kit
888-825-3432 | www
.S-5.com
S-5-PV Kit
The concept of combining photovoltaic arrays with standing seam metal roofing is growing—
and for good reasons. A standing seam metal roof has a life expectancy consistent with that
of framed PV modules. A 30-year power source on a 40-year roof, along with zero-penetration
technology creates the most sustainable roof system available with alternative power
generation, all without compromising the roof's warranty!
The new S-5-PV Kit boasts an important breakthrough in PV mounting technology. It is one
of the first solar module mounting solutions in the industry to be listed to the new UL subject
2703, a standard that covers both bonding and mounting. Furthermore, the S-5-PV Kit has
gained an ETL Listing to UL 1703.
The S-5-PV Kit features a groundbreaking new stainless steel mounting disk with twelve nodes
designed to ensure the module-to-module conductivity of anodized aluminum module
frames. This means the module is simply anchored with the kit and is automatically bonded.
No lugs or wire required except to connect one string of modules to another and to ground
the system. This connection detail represents installed electrical cost savings of $6-$12 per
unit. In most cases, the savings in time and materials is sufficient to pay for the entire S-5-PV
Kit and clamp setup.