ETC Ion - Manual (Page 232)

216 Ion Operations Manual
Introduction to Playback
Cues may be played back using the master playback fader pair. While any cue list can be loaded to
these faders, the first cue list you record to will automatically load to the master fader pair.
The master playback fader pair is located to the left of the control keypad. The master is a split
cross-fader pair. The two buttons beneath the master fader pair are [Go] and [Stop/Back]. The
[Load] button is located directly above the fader pair and the area of the LCD above it corresponds
as well, displaying the current cue and list active on the master fader.
For information about using the Universal Fader Wings, see Universal Fader Wings, page 389 .
Playback Controls
.
Load button
Fader
control
button
Master
fader
pair