ETC Ion - Manual (Page 280)

264 Ion Operations Manual
Updating a Submaster
It is possible to make changes to a submaster in live mode. [Update] is used to store changes to a
submaster.
• [Update] [Sub] [5] [Enter] - updates sub 5 to include changes in live output only for channels
already in submaster 5. You can also press the bump button for submaster 5 to select it.
• [Channel list] [Update] [Sub] [5] [Enter] - adds only the specified channels to submaster 5.
Labels can be changed without restoring the contents as well:
• [Sub] [6] [Label] [xxxx] [Enter]
• [Sub] [6] [Label] [Label] [Enter] - removes the label.
Releasing Content From a Submaster
To release content from a submaster, use one of the following methods:
• [Fader Control] {Off} & [Load]- stops any running effects and fades out according to the
{Restore} mode of the submaster.
• [Fader Control] {Release} & [Load] - behaves in the same way as {Off}. {Release} does not
unmap the fader.
• [Shift] & [Load] - behaves like {Off} and {Release} except that it will also unmap the fader.
Deleting a Submaster
You can delete a submaster using the [Delete] key. When a submaster is deleted, the slider
remains configured as a submaster, but it will be empty.
• [Delete] [Sub] [5] [Enter] [Enter] - deletes the contents of sub 5.