About channel, N o t e – ETC Ion User Manual

Page 286

Advertising
background image

270

Ion Operations Manual

Clicking on a CEM+ / CEM3 in the {About System} list will open the About Rack display, which
shows the following information about the rack:

Rack Name (displays as the title)

Type

Ambient Temperature

Phase A,B,C Voltages

Frequency

System Number

IP Address

Software Version

Rack Errors

Buttons available in the About Rack screen are {Activ. Preset}, {Deactiv. Preset}, and {Clear
Errors}
.

About Channel

Press [About] to put the CIA into “About” mode. When a channel is selected, the information below
is displayed. You can select the information you wish to view from the buttons located on the right
side of the CIA. The buttons are:

{Current Value} displays information that indicates:

Channel number

Device Type

Most recent intensity move (cue number)

Next intensity move

What the channel is inhibited by (if anything)

Keywords

Notes

A list of all parameters on the channel showing the current value and its source, the

DMX value, the absolute value, delay and timing information, marking information, and

any parked values.

{Background} displays similar information:

Channel number

Device Type

Keywords

Notes

A list of all parameters on the channel showing the background value and its source,

which shows what the parameters will go to if the current control source is removed.

The background data will be represented by the standard color coding scheme.

N o t e :

Clearing CEM+ / CEM3 errors from Ion will be temporary unless the errors have

been fixed at the CEM+ / CEM3. Errors displayed on Ion will clear on their own

once they have been cleared from the CEM+ / CEM3. Some CEM+ / CEM3 errors

can only be cleared at the CEM+ / CEM3.

Advertising