Remote processor unit (rpu), Hardware setup, Rear panel – ETC Ion User Manual
Page 384: N o t e
368
Ion Operations Manual
Remote Processor Unit (RPU)
Hardware Setup
Rear Panel
Step 1:
Attach the appropriate IEC power cord to the power connector.
Step 2:
Connect any monitors to the proper ports on the back of the RPU.
Step 3:
Connect the USB mouse and keyboard to the USB connectors.
Step 4:
Attach a network ethernet cable to the ethernet port.
Step 5:
Once all accessories and optional cables have been connected, switch the hard
power switch on.
N o t e :
The Ion RPU can support up to two monitors, either two DVI monitors or one VGA
and one DVI. The minimum screen resolution must be at least 1280x1024 by 32bit
color.
100-240VAC
100-240VAC
50/60 Hz
50/60 Hz
2A@120VAC
2A@120VAC
ETC 2U Processor Unit
ETC 2U Processor Unit
Electronic Theatre Controls, Inc.
Electronic Theatre Controls, Inc.
Middleton, WI USA
Middleton, WI USA
Remote Trigger
Remote Trigger
C
US
US
3060167
3060167
www.etcconnect.comw
w
w
.e
tc
c
o
n
n
e
c
t.
c
o
m
DMX
DMX
1
DMX
DMX
2
Phone Remote
Phone Remote
MIDI In
MIDI In
MIDI Out
MIDI Out
PUSH
PUSH
PUSH
PUSH
Hard Power
Switch
IEC Power
Connector
DVI-D Video
Ports
USB
ports
x6
Ethernet
VGA Video
Port
Audio Ports
(Not Currently
Enabled)
Remote
Trigger
Midi In &
Out
Phone
Remote
DMX
ports
x2