ETC Ion - Manual (Page 385)

D
Using the RPU and RVI 369
Front Panel
Step 1: Press the soft power switch to activate the RPU (check rear panel to ensure power
is connected and hard power switch is on).
Step 2: The backlit indicators will identify the operating status (master, backup, client, and so
on) of the unit.
Step 3: USB port is provided for easy show loading to or from a USB storage device.
Step 4: 20 buttons are configurable from the Eos Configuration Utility (ECU). They are set to
a default configuration. The label strips for these buttons are removable and
reversible. Any changes to the button configuration can be written on the opposite
side in pencil.
Start Up
After connecting power to the unit, press the soft power button on the front of the console.
By default, the RPU will boot into the Ion environment as a primary. If you wish to designate your
RPU as something other than a primary, you must exit the Ion environment and choose a different
designation from the Eos Configuration Utility welcome screen.
For more information on multi-console terms such as primary or backup, please see Multi-console
and Synchronized Backup, page 357 .
Master
Server
Offline
Client
Sync
Backup
R
Blind
Live Tab Escape Select M901 M902 M903 M904 Stop/Back
Scroll Lock M905 M906 M907 Go M908
Backlit
indicators
Soft power
switch
20 user-
configurable
buttons
(default shown)
USB port