ETC Ion - Manual (Page 400)

384 Ion Operations Manual
Live Mode
Live mode is used for modifying levels and recording or updating cues. This mode is intended to
allow you to make basic adjustments to show data. Buttons and softkeys function as they do within
Eos/Ion.
The command line is displayed in the LCD to verify the commands you enter. It also displays details
for the currently selected channel or the current cue (if no channels are selected).
Softkeys
The following softkeys are available on page one of live mode:
• Group
• Rem Dim
• Sneak
• Full
• Out
• Macro
The following softkeys are available on page two of live mode:
• Rec
• Update
• Time
• Cue Only/Track (shown as “Qoly/Tk”)
• Address
{Macro} allows you to execute a macro.
• {Macro} [3] [Enter]
In live mode, the left thumbwheel controls the level of the selected channels. The right thumbwheel
acts as next and last buttons, defaulting to next or last cue selection for the currently selected cue
list.