ETC Element Setup Guide User Manual
Setup guide
Corporate Headquarters 3031 Pleasant View Road, P.O. Box 620979, Middleton, Wisconsin 53562-0979 USA Tel +608 831 4116 Fax +608 836 1736
London, UK Unit 26-28, Victoria Industrial Estate, Victoria Road, London W3 6UU, UK Tel +44 (0)20 8896 1000 Fax +44 (0)20 8896 2000
Rome, IT Via Pieve Torina, 48, 001569 Rome, Italy Tel +39 (06) 32 111 683 Fax +44 (0) 20 8752 8486
Holzkirchen, DE Ohmstrasse 3, 83607 Holzkirchen, Germany Tel +49 (80 24) 47 00-0 Fax +49 (80 24) 47 00-3 00
Hong Kong Rm 1801, 18/F, Tower 1 Phase 1, Enterprise Square, 9 Sheung Yuet Road, Kowloon Bay, Kowloon, Hong Kong Tel +852 2799 1220 Fax +852 2799 9325
Service: (Americas)
(UK)
(DE)
(Asia)
Web:
www.etcconnect.com
Copyright © 2014 ETC. All Rights Reserved. Product information and specifications subject to change.
ETC intends this document to be provided in its entirety.
Page 1
4330M2200
RevC
2014-04
Remote Trigger
Phone Remote
DVI-D Port
Ethernet
1 & 2
2 USB Ports
2 DMX Ports
2 MIDI Ports
(One In and
One Out)
IEC Receptacle
Fan
Vents
Hard Power Switch
(I is on, O if off)
Make sure to keep the fan and vents clear of any obstructions.
IEC Power Cable
(1 ships with
Element) plugs into
the IEC Receptacle.
5 pin XLR DMX Cables plug into the
DMX ports to connect Element with
dimmers, scrollers, moving lights, and
other devices.
Cat 5 Ethernet Cable
plugs into the Ethernet
port for connecting
Element to a lighting
network or RFR.
USB ports are used to
connect a keyboard,
mouse, and/or USB
flash drives. One addi-
tional port is located on
Element’s face panel.
For information about MIDI and Remote Trigger,
please see the Eos Family Show Control User Guide.
The phone remote jack is for
plugging in a cordless phone
for remote control of
Element. Please see the
Element User Manual for
more information.
DVI-I Port
Audio Reserved
for Future
Implementation
2 USB Ports
Display
Port
2 USB Ports
eSATA
Port
Display Port
Display Port
DVI-I Port
DVI-D Port
DVI
VGA
Yes
No
Yes
with Adapter
Yes
Yes
No
No
Yes
with Adapter
Yes
with Active
Adapter
Element supports up to 2 monitors using the following
combinations:
Multitouch monitors need to be Windows 7 or 8 Compatible.
Physical
Port
Signal
Type
Setup Guide