Heidolph Pump Heads - Manual (Page 45)

I E I
45
GENERAL
Unpack your item carefully.
Inspect for damage and report such damage or missing parts to your supplier right
away.
Read your instruction manual carefully. Take time to save time while working with
your product. Make sure that every user has read and understood the instruction
manual.
Please store the instruction manual in a place easily accessible to every user.
IF ALL ELSE FAILS, READ THESE INSTRUCTIONS !
A so-called EURO-plug (DIN 49441 CEE 7/VII 10/ 16 A 250 V) is standard on all of
the products.
For the Continental US they feature a US-standard plug (NEMA Pub.No.WDI.1961
ASA C 73.1 . 1961 page 8 15A 125V).
For using the item in a country with deviating outlet / plug systems, we recommend
to use approved adaptors or to have an electrician replace the standard plug with
one mating your local system.
As shipped, the item features a protective ground wire. When replacing the original
plug, make sure to reconnect this protective ground wire in the new plug !
SAFETY INFORMATION
Please comply with all safety and accident prevention regulations as in force for
laboratory work !
Comply with all safety instructions in force for pumps !
Use extra care while working with flammable substances; refer to safety data
sheets. Store safety data sheets in a place easily accessible to all operators.
Use eye protection and adequate clothing.
Use extra care while working with flammable substances. Refer to safety data
sheets.
Pump drives do not feature explosion protection!
Caution ! Tubes are wear parts. Inspect tubes in regular intervals and replace on
condition.
Before connecting your item with the local power supply, make sure the item has
been designed for your local voltage; refer to data plate on item.