Ie i – Heidolph Pump Heads User Manual

Page 60

Advertising
background image

I

E

I

60

9. PD 5201, PD 5206 (figs. 47, 48)

Interface sockets (37 & 39) need to be closed with an interface plug or blind plug all

the time, not to void splash protection.

9.1. Standard functions

-

Turn item ON with power switch (29) located on

the item's rear panel.

-

Item runs through a processor self-test routine.

The following parameters are displayed, one after

the other:

-

all display (41) bars and all Select LEDs are ON.

-

pump head selected is displayed (e.g. „Pu 1).

-

gearbox transmission ratio is displayed, e.g.

"5.066“"

-

Tube ID selected is displayed, e.g. "3,1"

-

possible backstroke is displayed, e.g. "r on".

-

Item is ready to go at this point.

-

Use sense of rotation key (31) to select sense of

31: Direction of rotation

32: Start/Stop

33: Maximum

conveyance

34: Calibration

35: Change value

36: Selection key

Bild 48

36

34

40

40

33

35

31

32

44

41

fig. 47

39

37

29

-

All pump drives are resistant against water jets (IP 55).

Advertising
This manual is related to the following products: