Ricoh 7500 - Manual (Page 147)

List of the Setting Items
139
5
telnet
The following telnet can be used with the machine:
access, appletalk, authfree, autonet, bonjour (rendezvous), btconfig, device-
name, dhcp, diprint, dns, domainname, help, hostname, ifconfig, info, ipp, ipv6,
lpr, netware, passwd, prnlog, route, set, show, slp, smb, snmp, sntp, spoolsw,
sprint, ssdp, ssh, status, syslog, upnp, web, wiconfig, wins
Settings that can be used with PostScript 3
The following PostScript 3 settings can be used with the machine:
Note
❒ Depending on a type of printer drivers, different items may be displayed.
Settings Selectable Items
Collate: Off, On
Dithering: Auto, Photographic, Text, User Setting
Duplex: Off, Open to Left, Open to Top
Fit to Print Size: Prompt User, Nearest Size and Scale, Nearest Size and Crop
Image Smoothing: Off, On, Auto, Less than 90 ppi, Less than 150 ppi, Less than
200 ppi, Less than 300 ppi
Input Tray: AutoSelect Tray, Bypass Tray, Tray 1(LCT), Tray 2, Tray 3,
Large Capacity Tray
Output Tray: Printer Default, Copy Tray, Finisher SR970/4000 Upper Tray,
Finisher SR970/4000 Shift Tray, Fnisher SR4000 Booklet Tray,
Finisher SR841 Upper Tray, Finisher SR841 Shift Tray, Booklet
Processor Tray, Mailbox Tray 1–9
Resolution 600 dpi, 1200dpi
Size: See General Setting Guide.
Staple: Off, Top Left, Top Right, 2 at Left, 2 at Right, 2 at Top, 2 at Center
Edge Smoothing On, Off
Toner Saving On, Off
Type: See General Setting Guide.
Paper Selection Same Paper for All Pages, Different Paper for First Page, Use
Slip Sheet, Chaptering
Punch: Off, 2 at Left, 2 at Right, 2 at Top, 3 at Left, 3 at Right, 3 at Top,
4 at Left, 4 at Right, 4 at Top