Humanscale Float Raising the bar - Manual

To Adjust Height:
Step 1 Engage the Release Paddle with one hand.
Step 2 Using both hands, raise or lower the Work
Surface to the desired height.
Step 3 Table should rise and lower easily.
If the table is difficult to raise, turn the Counterbalance
– Spring tension adjuster (found on the right side of the underside
of the Work Surface) clockwise.
If the table is difficult to lower, turn the Counterbalance
– Spring tension adjuster counterclockwise.
Step 4 Table will automatically lock into position
once the Paddle is released.
Raising the bar
The next-generation height-adjustable table