INCRA Marking Rule User Manual

When accuracy counts … incra rules, 18" precision marking rule

Advertising
background image

Precision Marking Rule

Marking:

Place your sharp pencil point or

scribe in the desired hole or slot,

then make your mark.

Measuring:

Use the scale lines on the edges to

make precision measurements.

Easy and Accurate

To mark with a 0.5mm

Mechanical Pencil:

Just hold

the pencil vertically and draw a

short line in one of the slots, or

twist the pencil in a hole to mark

a dot.

To mark with a Wooden

Pencil:

First, sharpen the pencil,

then twist the lead once or twice in

any one of the holes to give it an

ultra fine point ready for marking.

To mark with a Metal Scribe

or Center Punch:

Any scribe

or center punch sharp enough to

fit through the holes can be used.

Use finger pressure ONLY to

mark a precisely located “dimple”

in soft materials such as wood,

paper, plastic, brass or aluminum.

DO NOT

damage your preci-

sion rule by pounding the point

through the hole with a hammer.

When accuracy counts …

INCRA RULES!

18" Precision Marking Rule

Put YOUR Mark on Precision

Any rule can just

measure, but only

INCRA guarantees

YOUR mark of

precision on

everything you do!

INCRA RULES are available

in many other popular styles

and lengths.

Manufactured by:

Taylor Design Group
P.O. Box 810262
Dallas, Texas 75381

www.incra.com

INCRA is a Registered Trademark of Taylor Design Group, Inc.
©2013 Taylor Design Group, Inc.

Advertising