Intelix DL-DA12 - Manual

11675 Ridgeline Dr
Colorado Springs, CO 80921
Phone: 719-260-0061
Toll-Free: 800-530-8998
Fax: 719-260-0075
DL-DA12 Installation Guide
Instructions:
1. Connect the source device to the HDMI input using an HDMI cable that is less than or equal to 5 meters in length. If the
source device that is further away, it is highly recommended to install a Digitalinx DL-HD70 or DL-HDE100.
2. Connect the display devices to HDMI outputs using HDMI cables that are less than or equal to 5 meters in length. For
display devices that are further away, it is highly recommended to install a Digitalinx DL-HD70 or DL-HDE100.
3. Plug the power supply into the power input port on the rear of the distribution amplifier. Twist the collar of the power
plug in a clockwise direction to secure the connection.
DL-DA12 Installation Guide
HDMI Distribution Amplifier
Rev 140624
The Digitalinx DL-DA12 is a one input to two output HDMI distribution amplifier (DA). The DL-DA12 supports supports 3D
and 4K video resolutions as well as multichannel audio formats. The EDID settings of the display on Output 1 are used to
negotiate with the source device.