Jabra PRO 9470 User Manual - Manual (Page 16)

16
english
Jabra PrO 9460, Jabra PrO 9460 dUO,
Jabra PrO 9465 dUO and Jabra PrO 9470
3.3 CONNECT TO SOFTPHONE (PC)
Connecting to a PC will allow connectivity with a PC softphone (such as Skype). Supported softphones have full
functionality with the Jabra PRO headset, such as answering and ending calls with the headset multi-function
button. Unsupported softphones have only audio functionality with the Jabra PRO headset, and have no
interactivity with the Jabra PRO headset call functions.
for the latest list of supported softphones, please visit the Jabra website at www.jabra.com/pcsuite.
Connect the base to a PC, and configure softphone audio
1. Plug the supplied USB cable into the port marked
on the base.
2. Connect the USB cable to any free USB port on the PC.
3. Download and install Jabra PC Suite from www.jabra.com/pcsuite.
4. Tap the tool icon
on the touchscreen to open the settings menu, and tap Phone Settings > Connect
Softphone (PC). If your softphone is not supported, select None (audio only) during the setup wizard.
5. Launch softphone software on the PC, and set the Jabra PRO as speaker and microphone in the audio
configuration. Refer to specific softphone documentation for assistance in setting audio configurations.
3.4 CONNECT TO MOBILE PHONE WITH BLUETOOTH®
Connecting to a mobile phone with Bluetooth is only available for the Jabra PRO 9465 Duo and Jabra PRO 9470,
and is done via the touchscreen.
Connect to a mobile phone using Bluetooth®
1. Tap the tool icon
on the touchscreen to open the settings menu.
2. Tap Phone settings > mobile phone > Setup mobile phone.
3. Tap Confirm to start the mobile phone connection wizard, and follow the instructions.
mOBILE PHONE
Base ringtone volume
Setup mobile phone
Disable mobile phone
SETUP
Please note during setup you
are unable to make or receive
calls. The base will restart to
save and apply settings.
Confirm
How to reconnect to mobile phone with Bluetooth®
If the base loses the Bluetooth® connection with the mobile phone it will attempt to reconnect for 60 seconds.
To force reconnection:
1. Ensure the mobile phone is in range of the base, and that Bluetooth® is activated on the mobile phone.
2. If there is no connection a Bluetooth® logo will be displayed on the mobile phone icon on the touchscreen.
Tap the greyed out mobile phone icon to begin re-connecting the mobile phone with the base.
3. When successfully reconnected, the mobile phone icon will appear connected.