Jabra PRO 9470 User Manual - Manual (Page 39)

40
english
Jabra PrO 9460, Jabra PrO 9460 dUO,
Jabra PrO 9465 dUO and Jabra PrO 9470
Recharge cradle:
fits supplied Jabra PRO headset; features magnetic coupling; easily replaced to accommodate future headset
upgrades
Audio:
Built-in speaker provides ring tones and/or audio feedback for touchscreen operation
Audio bandwidth:
Narrowband or wideband
Desk phone connections:
RJ-11 for handset, RJ-11 for phone body (or headset port), RJ-45 for AUX (for electronic hookswitch or GN1000
handset lifter)
Clear dial tone switch and microphone volume switch:
PRO 9460 and 9465 Duo variants only. Electromechnical switches
Remote call control standards:
GN1000, Jabra IQ EHS, Cisco, DHSG, mSH and Siemens optiPoint. Each requires additional cabling and/or
equipment available separately; more may become available in future and added via firmware upgrade. GN1000
is supported by default and requires no additional configuration
Busy light indicator:
2.5mm jack connector (available as an accessory)
PC connector:
micro USB
Firmware update:
Downloadable from web, or via Jabra PC Suite. Language packs also available for touchscreen
PC-based configuration:
All settings can be stored and loaded from a PC for backup and mass deployment
Softphone support:
full call handling for Skype, microsoft Office Communicator, Avaya and Cisco IP Communicator; for other
softphones see headset as a standard sound card; support for additional softphones may be added via driver
updates for the PC. for the latest updates, see jabra.com/pcsuite on the web
Theft protection:
Kensington Security Slot standard
This product contains font software progams which generate human readable typeface designs on base display.
The font software family is frutiger Next licensed to GN Netcom by Linotype
11.7 JABRA PRO 9465 DUO AND JABRA PRO 9470 BASE BLUETOOTH SUPPORT
Bluetooth version:
BT 2.1 Class 2
Bluetooth range:
Up to 10m (class 2)
Bluetooth profiles:
Headset profile (HSP 1.1), hands-free profile (HfP 1.5), device-identification profile (DIP 1.3)
Bluetooth pairing:
1 headset
11.8 MATERIALS AND ALLERgIES
The headband attachment is made of stainless steel and does not have a nickel-coated surface. Nickel release
from the headband is 0.02 μg/cm2/week, which is below the 0.50 μg/cm2/week limit established by EU Directive
94/27/Ef. The stainless steel alloy was tested for nickel release in accordance with the European standard EN
1811:1998.
Other wearing-style attachments are made of plastic and contain no known allergens. The ear cushions do not
contain vinyl. The products contain no nickel, chrome or natural rubber that can come into contact with users’
skin.