JUMO 902910 CANtrans T RTD Temperature Probe with CANopen Output Data Sheet User Manual

Technical data

Advertising
background image

2010-06-11/00418901

Data sheet 90.2910

Page 1/4

JUMO GmbH & Co. KG
Delivery address: Mackenrodtstraße 14,

36039 Fulda, Germany

Postal address:

36035 Fulda, Germany

Phone:

+49 661 6003-0

Fax:

+49 661 6003-607

E-mail:

[email protected]

Internet:

www.jumo.net

JUMO Instrument Co. Ltd.
JUMO House
Temple Bank, Riverway
Harlow - Essex CM20 2DY, UK
Phone: +44 1279 63 55 33
Fax:

+44 1279 63 52 62

E-mail:

[email protected]

Internet: www.jumo.co.uk

JUMO Process Control, Inc.
8 Technology Boulevard
Canastota, NY 13032, USA
Phone:

315-697-JUMO
1-800-554-JUMO

Fax:

315-697-5867

E-mail:

[email protected]

Internet: www.jumo.us

JUMO CANtrans T
RTD temperature probe
with CANopen output

For temperatures from -50 to +450°C
Available as single or double RTD temperature probes
Vibration-proof design
Limit value monitoring
Configuration via standard CANopen software tools

RTD temperature probes are preferentially used for measuring temperatures in liquids and gas-
es. A key feature is the reliable sealing of this installation type for vacuum and overpressure.
Areas of application are, amongst others, in medical technology, mechanical engineering, drive
technology, utility vehicles, and railroad systems.
The measuring insert is equipped with a Pt 1000 temperature sensor per DIN EN 60 751, Class
B, as a standard. The measured temperature value is digitized, linearized and provided via the
serial bus protocol CANopen for further processing (CAN slave). A large number of useful addi-
tional functions are realized via the DS 404 device profile. All settings are possible via standard
CANopen software tools.

Also available, a pressure transducer with CANopen output, please refer to data sheet 40.2055

Technical Data

Connection

Round plug M12x1, 5-pin per IEC 60 947-5-2

Process connection

Threaded, stainless steel 1.4571

Sheath

stainless steel 1.4571

Measuring insert

Pt 1000 temperature sensor per DIN EN 60 751, Class B, two-wire circuit

Protection class

IP67, per DIN EN 60 529, with connection plug screwed on

Response time

t

0,9

= 12s, in water 0.2m/s

Advertising