Landoll W-360 Rear S-Tine Spacer - Manual

F-770
W-360 Rear S-Tine Spacer Instruction Sheet
The Rear S-Tine Spacer will prevent the rear S-Tines
from coming in contact with the roller wheels.
Installation:
Place the spacer against the rear frame weldment, lining
up the top two bolt holes. Insert two 1/2” x 6-1/2” bolts
through the weldment then the spacer, slide the S-Tine
bracket over the bolts, secure with 1/2” lock nuts. See
Illustration below. Repeat for the eight other spacers.
Wing spacer installation similar.
Rear S-Tine Spacer
Rear S-Tine Spacer
ITEM PART NUMBER DESCRIPTION QTY.
1 184610 SPACER S-TINE 9
2 1-654-010055-18 SCR, HX CP, 1/2-13UNCX6-1/2 GR5 18
3 9J091 BRACKET, S-TINE 9
4 1-512-010005-09 NUT, HEX, SLFLKG, 1/2-13 GRB 18
Front
1
2
3
4
3
4
1
2