Lenze CS 9000 DVI Operating Instructions - Manual (Page 14)

Product description
Application as directed
3
l
14 BA_CS9000DVI EN 4.0
3.2 Application as directed
The monitor panel is used as intended if it is used solely for providing information in
common industrial and commercial areas. Another use or any further use is not
permissible.
A use that is not intended also includes a use harbouring fatal risks or dangers which,
without the provision of exceptionally high safety measures, may result in death, injury or
damage to material assets.
The monitor panel must in particular not be used ...
ƒ in private areas.
ƒ in potentially explosive atmospheres.
ƒ in areas with harmful gases, oils, acids, radiation, etc.
ƒ in applications where vibration and impact loads occur, exceeding the requirements
of EN 50178.
ƒ for performing safety functions, for instance
– in air traffic control / in flight−control systems
– for the monitoring/control of nuclear reactions
– for the monitoring/control of means of mass transport
– for the monitoring/control of medical systems
– for the monitoring/control of weapon systems
Higher−level safety systems must be used to guarantee the protection of persons and
material assets!
3.3 Device features
CS x0xx DVI
Design l Front frame of anodised and etched aluminium
l Mounting frame made of stainless steel
l Front made of polyester foil
l Control elements can be expanded by add−on components
Mounting l Mounting frame with VESA−100 adapter surface
l For wall or support arm mounting
l Adaptable to various support arm systems via adapter plate
Electrical supply l 24 V DC voltage supply
Interfaces l 1 x DVI
l 2 x USB type A (V 2.0)
l 1 x USB type B (V 2.0)
Accessories
ƒ Add−on component
– With control desk for 7 or 14 switching elements and emergency−off switch
– With MF2 keyboard in stainless steel finish
ƒ DVI/USB extender