Lenze CS 9000 DVI Operating Instructions - Manual (Page 36)

Electrical installation
Connecting the supply and peripheral devices
Preliminary works
6
l
36 BA_CS9000DVI EN 4.0
6.3 Connecting the supply and peripheral devices
6.3.1 Preliminary works
For connecting the supply and the peripherals, the screen must be fitted into the mounting
frame and hinged down.
(
Stop!
Screen may fall down
If the screen is not screwed together with the mounting frame it may fall
down.
Possible consequences:
ƒ The screen is damaged.
ƒ Injuries by the falling device.
Protective measures:
ƒ Secure screen against falling down.

ƒ „
‚
0
2
1
+
3
4
}
max. 12 kg
1 0 0
1
}
}
}
0V
U
0V
U
0V
U
CS50x0−012
How to proceed:
1. Place 2 screen 1 in the mounting frame 0 using the attachment and secure it
against falling down during the following worksteps.
2. Plug in the connection cable
1.
– Plug in the PE connection cable
3on the mounting frame
– Plug in other connection cables
4 (supply, DVI, USB).
3. Retract screen.
4. Screw screen to the mounting frame.
Always fit all screws.