Lenze EASY Starter(Application Loader) - Manual (Page 5)

Lenze · EASY Starter (Application Loader) - "Batch"-Mode · 1.1 EN - 06/2014
5
"Batch" mode: Download applications automatically to target systems
What is the "Batch" mode?
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
3 "Batch" mode: Download applications automatically to target systems
3.1 What is the "Batch" mode?
The "Batch" mode enables the automatic download of applications to several target devices. A script
file created before contains the desired communication settings and information on the target
device.
• In the "Batch" mode, the »EASY Starter (Application Loader)« processes the script file defined by
you. Hence, no further user entries are required.
• For diagnostic purposes, the »EASY Starter (Application Loader)« in "Batch" mode writes all
processing procedures and error messages in a log file.

Note!
For using the "Batch" mode, you need a valid "EASY Advanced" licence (or higher) for the
Lenze »Engineer« or »PLC Designer« V 3.x.

Note!
Observe the following behaviour in the "Batch" mode:
• Automatic activation of the controller inhibit in the target system!
• Automatic stop of the running PLC program in the target system!
• The output of the messages of the "note" and "information" category is partly
suppressed.