Mark Feldstein & Associates LED Branches in Vase with Timer - Manual

(A)
(B)
ON OFF TIMER
I N S T R U C T I O N S
Maumee, Ohio 43537 • www.markfeldstein.com
Battery Operated
1. Remove LED Branches from packaging.
3. Insert 3 AA batteries into battery box. Make sure to install
batteries carefully and do not damage springs inside the
battery box. Make sure polarity is as indicated (see A).
3. Use the ON-OFF-TIMER switch (B) on the bottom of the battery
box to turn LEDs to the Off, ON, or TIMER* position.
* Built-in Automatic Timer Function. When switch is set to the
TIMER position, the LEDs will turn on for 6 hours and then
automatically turn off for a period of 18 hours. If the TIMER function
settings are not changed, the LEDs will Automatically turn ON and
OFF at the same time each day.
Care: Use damp cloth to gently wipe LED Branches.
Do not use solvents.
NOTE: For Indoor Use Only. Battery Case is Not Water Tight.
BATTERY NOTICE
Do not mix old and new batteries. Do not mix alkaline, standard (Carbon-Zinc),
or rechargeable (Nickel Cadmium) batteries. Replace all batteries at one time.
To avoid leakage or explosion, do not put batteries in fire. Remove batteries if
consumed or if product is to be left unused for a long period of time. Clean
the battery contacts and also those of the devices prior to battery installation.
Alkaline batteries are strongly recommended.
Make sure to install Make sure to install
batteries carefully and do not damage springs inside the batteries carefully and do not damage springs inside the
battery box.
battery box.
2. Insert 3 AA batteries into battery box. Make sure to install