Associating the printer, Windows® 95/98/me, Associating the printer -5 – Brother NC9100H User Manual

Page 43: Windows, 95/98/me -5

Advertising
background image

4 - 5 NETBIOS PEER TO PEER PRINTING

7

You must now enter the server name and port name for the
actual Print/Fax server. You can use the Browse button to
search for the Print/Fax server, select the domain/workgroup
name, and then the server is listed. If the print server does not
automatically appear in your browse list, then you must ensure
that the domain name is configured correctly. Otherwise you
must enter the name manually. The name should be compliant
with UNC (Universal Name Convention). For example:
\\NodeName\ServiceName

.

Where NodeName is the NetBIOS name of the Brother Print/
Fax server (the default name is usually BRN_xxxxxx, where
xxxxxx

is the last six digits of the Ethernet address), and

ServiceName

is the service name for NetBIOS of the Print/

Fax server. By default it is BINARY_P1. For example:

\\BRN_310107\BINARY_P1

8

Then press OK.

9

Click the Finish button. You must now restart your computer
before you can continue.

Associating the Printer

1

You must now create a printer on your Windows

®

95/98/Me

/

2000/XP and Windows NT

®

4.0 systems using the standard

Windows

®

printer setup procedure. To do this, go the Start

button, select Setting and then Printers.

Windows

®

95/98/Me

2

Select Add Printer to begin the printer installation.

3

Click Next when you get the Add Printer Wizard window.

You can find the NetBIOS name and MAC address by
printing out the printer configuration page. see Resetting the
Print/Fax Sever back to factory settings (Test Switch)
on
page 13-4 for
information on how to print the configuration
page on your Print/Fax server.

Advertising
This manual is related to the following products: