MBT Lighting SM100DMX - Manual

MBTLighting.com SM100DMX “Flurry DMX” User Manual
1/3
SM100DMX “Flurry DMX” User Manual
INTRODUCTION
Congratulations on the purchase of your MBT Lighting SM100DMX snow machine. Please
read this manual carefully and thoroughly before using it, in order to operate it properly.
SAFETY INFORMATION
Pay attention to all warning labels and instructions printed on the exterior of your MBT Lighting
“Flurry DMX” Snow Machine.
1. For indoor use only. Do not use outdoors. Keep this machine dry. It must be used in a dry,
moisture-proof place in order to work effectively. This machine is not water- or splash-proof. If
moisture, water, or snow liquid gets inside the housing, immediately unplug the unit and contact
a service technician or your MBT Lighting dealer before using it again.
2. Keep the snow machine in a well-ventilated area. Never cover the unit’s vents. In order to
guarantee adequate ventilation, allow a free air space of at least 20 cm around the sides and top
of the unit.
3. The Snow Machine can be used on the ground flat, or mounted overhead at no less than a
15º angle. Always keep it upright.
4. Do not use the Snow Machine without the proper liquid. Contact your MBT Lighting dealer to
order. Use snow fluid liquid ONLY, otherwise any other liquid used, will cause damage rendering
the snow machine unusable and your warranty invalid. Never add flammable liquids of any kind
(oil, gas, perfume) to the snow liquid.
5. When filling/refilling, always unplug your Snow Machine before filling its tank. Do not drink the
snow fluid. Always secure snow liquid cap before using the machine and keep dust and other
particles out of the snow fluid container.
6. Always monitor tank fluid level during operation. Running a snow machine with no snow fluid
can permanently damage the unit.
7. The snow machine produces a low minimum “wind” noise when working.
8. No user serviceable parts inside. Refer to your MBT Lighting dealer or other qualified service
personnel.
9. For adult use only. Snow machine must be installed out of the reach of children. Never leave
the unit running unattended.
10. Never aim the output nozzle directly at people.
11. Turn off or unplug the power cord when not in use.
BRIEF INTRODUCTION OF FUNCTION
1.SM100DMX has two working modes:
· DMX-512 control
· Z-6 controller box control