Baby Einstein 30886 User Manual

Lights and melodies bouncer, Instruction guide, Assembly instructions

Advertising
background image

– 1 –

ESPAÑOL: PÁGINA 7 • FRANÇAISE : PAGE 13

IMPORTANT! KEEP FOR FUTURE REFERENCE.

30886

lights and melodies

bouncer

Instruction Guide

Congratulations on your purchase of a new Baby Einstein

product! Please read all instructions before assembly and use
of the bouncer.

WA R N I N G

Safety Guidelines to Prevent Injury

NOT INTENDED FOR CARRYING BABY.

NEVER leave child unattended in the bouncer.

ALWAYS use restraint system.

NEVER use for a child who is able to sit upright
unassisted.

NEVER place a child over 25 lbs. (11 kg) in the
bouncer.

NEVER lift bouncer using the toy bar as a handle.

NEVER move unit while child is in seat!

NOT for use in automobile or airline travel.

NEVER use as a car seat or infant carrier.

NEVER attach any additional strings or straps to
product or toy bar.

FALL HAZARD:

A child’s movement can slide the
bouncer.

NEVER place the bouncer on
countertops, tables, on or near steps
or on other elevated surfaces.

ALWAYS use on the floor.

SUFFOCATION HAZARD:

NEVER use on a soft surface (bed, sofa, cushion),
as seat may tip over and cause suffocation.

IMPORTANT:

Adult assembly required.

Care should be taken when unpacking the bouncer.

Examine product frequently for damaged, missing,
or loose parts.

Do not use product if damaged or broken.

Assembly Instructions

1

Connect the wire uprights to the base frame
wire.

A Place the base frame wire on a flat surface. The two rear

anti-skid feet must be facing down, contacting the
surface.

B Locate the left and right wire uprights and place them

near the corresponding ends of the base frame wire. If the
parts are correctly placed, the holes in the sockets will be
on top.

C Push the socket on

the end of the left
wire upright onto
the left end of the
base frame wire.
The hole in the
side of the socket
must face inward
toward the
opposite end of
the base frame
wire.

D Press the spring-loaded button and push the socket until

the spring-loaded button fully engages, locking the frame
wires together.

E Repeat Steps C and D for the right wire upright.

Holes

on top

Left wire upright

Right wire

upright

Base frame wire

Anti-skid feet

Hole in side of

socket

Advertising