MK Diamond MK-101 Stand - Manual

MK-101 Stand Instruction Sheet
The MK-101 weighs eighty-seven (87.5)
pounds. To lift the saw using two people,
each person will grasp the front and back of
the frame. To lift the saw using one person,
remove the Cutting Head first, and then grasp
the front and back of the frame.
CAUTION
Cutting
Head
Lift
Point
(A)
Open the stand and place on
flat surface
(B)
Remove Water Basin,
place saw on stand
(C)
Ensure saw frame is
positioned properly
(D)
Reinstall the Water Basin
© 2010 MK Diamond Products, Inc. All Rights Reserved. Images and specifications are subject to change without notice. MK-101 Instruction Stand Sheet Part# 168244-IS (03/10)
1315 Storm Parkway, Torrance, CA 90501 | P 800.421.5830 | www.mkdiamond.com | F 310.539.5158
This stand is for use on the new saw frame
(part# 168021) only. Please check that you
have the correct frame (see below) before
attempting to use this stand.
NOTE:
Part# 168021
Part# 153003
Lift
Point
Stand Part# 168244